Powder, you were, I stole your idea from your pics.
It mounts like the stock tank, I made brackets on the steering hoop that the tank slides into, then bolts down in the rear. Other than the fab time for that, it was relatively easy to get on there.
The trim part was a pain in the arse. I bought an old console off a Dragon/IQ or something, from someone on here. In my head it was going to work, then when I got it on it wasn't going to work at all. Then I had the idea to cut and heat/bend/form the console to the shape it is in now. I used a console that already had some holes in it, if I were too worried about it I would get a new console and redo it, but it works. Nice and slim, I like the seat except it is slicker than snot when a little snow gets on it. Oh, had to shorten the rear bracket also, to fit the kickup on the tunnel, I didn't want the seat getting taller as I slid back.
Mike, those are the stock grills, with that waterproof fabric stuff on them. I got tired of loosing them, so bought a set on Ebay, covered them with fabric, used hot-glue to attach on the back (worked great), then installed them and used the self-tapping torx screws that are all over Cats to make sure they never come out again. The Poo console is trimmed to fit in behind the Cat side pullstart console and the hood on the left.
Chris