P
I am looking to throw a 136 under one of my phazers but can not find any body who sell a 116 to a 136 ext. I thought hartman used to but cant find it any more. Any ideas?
Long tracking the old Phazer
- Thread starter PowderMT
- Start date
N
call tom i bet he still has it.
C
Just fab up a couple of 1/4" aluminum plates same as the factory extensions on the Enticer II .... just did this to a couple of our old Ovations to run 121" tracks instead of the 116 stock tracks.
got any pictures for ideals, I have a 136 I want to install in a Phazer II
P
I actaully have a Phazer I have done this to already. I bought a wrecked one and swapped over the whole rear skid. I will try to get a couple pics. It is still a work in progress.
R
i would say get a v/mtn max skid or rails i love the 2 smoke phazer. my first sled. when i wanted to long track my dad brought home my rmk 600 w/136
i looked in a western power sports catalog and ordered up rail extensions that were the correct length for my 133 conversion, and it worked perfectly.
136-116=20"/2=10"
the catalog should list some extensions for yamaha that offer 10 or so inches of length. Like 136-156 extensions. WPS extensions can be mounted like an inch forward or back, if you dont get it right the first time.
I think WPS also had the 136 tunnel extension i used. Very basic, and i had to paint it to match. i threw away the original pz bumper and bolted one up off another sled.
i wont do another tunnel ext. on one of these....too much work, when a 121 1.25" track will go on in 1/3 of the time without the tunnel ext, and works so darn well...
good luck
136-116=20"/2=10"
the catalog should list some extensions for yamaha that offer 10 or so inches of length. Like 136-156 extensions. WPS extensions can be mounted like an inch forward or back, if you dont get it right the first time.
I think WPS also had the 136 tunnel extension i used. Very basic, and i had to paint it to match. i threw away the original pz bumper and bolted one up off another sled.
i wont do another tunnel ext. on one of these....too much work, when a 121 1.25" track will go on in 1/3 of the time without the tunnel ext, and works so darn well...
good luck
Last edited:
P
I ended up just putting a polaris RMK skid under it. Works great. Ill try and get some pics up.
T
There is a tunnel extention for a phazer on ebay right now.
Just about wrapped up on a "home-build" Van-Amburg "style" tunnel mod on my 1992 Exciter. Cut the rear tunnel up and had my own tunnel extension fabbed up. Sled is down at the shop getting tuned... will throw up some pics when she gets home.
T
Where are the pictures? Sound kinda cool.
WOW! Forgot about this thread! Thought this would be buried 10 pages down! Threw the exciter on the backburner waiting for the money to recover the seat. Tunnel extension is laying next to it... guess I better get on it, eh?
Where did you get the tunnel extension from? I have been looking for one.
S
Well?? Any pics??
I'm thinking of throwing a Phazer suspension and track on my 81 Enticer. I need more travel and a longer track.
I'm thinking of throwing a Phazer suspension and track on my 81 Enticer. I need more travel and a longer track.
L
The SC 10 suspension out of Ski Doo Summit works great too, I that in mine it worked great.
Just took it down to our local blacksmith shop. You can use any metal fab shop that has pressbrakes. They'll be able to do it for ya.
This was probably the FIRST mod I ever attempted back in the day. The track is what will be your issue. The drivers on the old Enticers wont match the 2.52 you'll find on most all tracks. (tracks that WILL MATCH will all have the small lugs) You cant switch drivers because the axle shaft is square where most evrything for the next 20 years was "hexagonal". I had (and still do) an old Phazer suspension and I bought a 1" ski-doo track to put in the Enticer. It was past my capabilities.... I cant say as to yours? A chaincase install will be tough to align with the jackshaft... and it goes on from there. Probably not worth the effort when you can pick Phazers up for less than $800.00.
Most any suspension you can find will swap in. Just have to double check your widths. (I have a Polaris Wedge skid that would fit as well)
