Munster T-Motion Delete

Devilmanak · Oct 31, 2018

Holy cow. 3 days from Whistler to me here in Idaho. Under $100 US shipped for two of them. They are beautiful, great machining, the packaging is what really blew me away. Very very professional. Anyway, I ordered two of them, been showing them to local shops, Munster hit a home run here!

Old Scud-doo · Nov 1, 2018

Very nice. I'll have to pick that up if my brass lockout washer wear out. Makes you wonder why nobody thought if this before!

Devilmanak · Nov 1, 2018

Right? They probably did, but were too costly to do. I believe that Muster does all his stuff in house.

DITCHBANGER · Nov 1, 2018

have 2 munster t motion delete's NIB..for G4 chassis $70us ship'd

Devilmanak · Nov 1, 2018

DITCHBANGER said:
have 2 munster t motion delete's NIB..for G4 chassis $70us ship'd

I'll take those deletes if you still have them.

bnorth · Nov 6, 2018

Munster makes nice stuff. Not a huge range of products but what's produced is quality.

Devilmanak · Nov 6, 2018

Agreed. Was going to try the finger throttles, I have a f-ed up thumb and weird wrist, but for the cost of the kit and the guard, gonna pass. Mod my stocker if I need to.

Motodrew · Nov 13, 2018

Here's my install video of the Munster T Motion Delete:

(Note: It's better to use a press rather than a sledge.) :face-icon-small-ton

<iframe width="560" height="315" src="https://www.youtube.com/embed/T3QP1byKPsM" frameborder="0" allowfullscreen></iframe>

Blk88GT · Nov 13, 2018

Oh man, at least use a block of wood. That was painful to see.

Motodrew · Nov 13, 2018

Blk88GT said:
Oh man, at least use a block of wood. That was painful to see.

Agreed! I'm always in a rush...

kanedog · Nov 13, 2018

My my you swing a big hammer!

Sent from my SM-G920W8 using Tapatalk

Motodrew · Nov 13, 2018

kanedog said:
My my you swing a big hammer!

Sent from my SM-G920W8 using Tapatalk

:sorry: In retrospect, I definitely should have used a block of wood or something.

caper11 · Nov 13, 2018

You didnt have a c-clamp to press the bushing in??? I also didnt see yah put the bushing inside the brass one. I hope that slid in nice with no restrictions. If there was, watch the through bolt! It may start pivoting on the bolt and loosen it, we have been down that road before.

kanedog · Nov 13, 2018

Motodrew said:
:sorry: In retrospect, I definitely should have used a block of wood or something.

Ya got'er done, it's working and you suffered a bit of online harassment. Typical day. No biggie!

Sent from my SM-G920W8 using Tapatalk

Devilmanak · Nov 13, 2018

caper11 said:
You didnt have a c-clamp to press the bushing in??? I also didnt see yah put the bushing inside the brass one. I hope that slid in nice with no restrictions. If there was, watch the through bolt! It may start pivoting on the bolt and loosen it, we have been down that road before.

That's what I was thinking, the part where the mashed brass had to be clearanced so the sleeve could be inserted was left out.

Search

Munster T-Motion Delete

Devilmanak

Well-known member

Old Scud-doo

Well-known member

Devilmanak

Well-known member

DITCHBANGER

Well-known member

Devilmanak

Well-known member

bnorth

Free Member

Devilmanak

Well-known member

Motodrew

Well-known member

Blk88GT

Westbound and down

Motodrew

Well-known member

kanedog

Undefeated mountain clutching champ of the world.

Motodrew

Well-known member

caper11

Well-known member

kanedog

Undefeated mountain clutching champ of the world.

Devilmanak

Well-known member

Similar threads