BD turbo apex wont idle after letting off throttle?

R

relentless rider

Well-known member

Jan 25, 2009

862

208

43

in the mountians western mt

• Jan 15, 2010

• #1

It will set code 14 before it stops running,cant find the problem anywere.Ive checked the timming,put new senser,and throttle bodys on,new hoses form BOV to the senser,check all wiring.Im running fastraxx fuel box thats almost new,change the stock fuel program to -25. Could a bad BOV cause this problem im having?? Open to any help.Thanks

 

Z

zebiraross

Free Member

Oct 8, 2003

1,410

456

83

44

Utah

• Jan 15, 2010

• #2

Have you replaced the air pressure sensor and made sure all the vaccume hoses associated with it are hooked up and not kinked or maybe have holes in them? A lot of time the hose associated with this sensor can also freeze up so if your sled hasn't had a chance to "thaw" out make sure to bring it into a warm garage for a night and let things thaw out. Double check that vaccume hose and make sure it is ok.

 

R

relentless rider

Well-known member

Jan 25, 2009

862

208

43

in the mountians western mt

• Jan 15, 2010

• #3

Yep all the hoses are new,and the senser is new,sleds always in a worm shop.

 

Z

zebiraross

Free Member

Oct 8, 2003

1,410

456

83

44

Utah

• Jan 15, 2010

• #4

Have you unhooked the battery for a few min?

 

R

relentless rider

Well-known member

Jan 25, 2009

862

208

43

in the mountians western mt

• Jan 15, 2010

• #5

About a month ago,could the BOV or the Fastraxx box be causing this?Sled runs fine with charge tube off!

 

Z

zebiraross

Free Member

Oct 8, 2003

1,410

456

83

44

Utah

• Jan 15, 2010

• #6

Do a boost leak test if your concerned about your bov. Unhook your battery for about 5 min and see what that does.