J
It looks like the primary bushing on the moveable sheave came out. There is a huge gap when I place the sheave back on the fixed shaft. The opening measures about 43mm and from what I have researched it should be 40mm, which leads me to believe the bearing is gone. If that is the case, the lip that holds it in is also gone. Can I get by with gluing in the new bushing until I am able to find a replacement sheave?
Otherwise, what year clutches could I make work on this? I can find a few in the 04 to 06 range, but nothing for 07 or 08 in my area.
This was a suprise to me especially since I have a trip coming up this Saturday. Had a vibration that I had assumed was just a misaligned track.
It is a 2008 summit 800r
Otherwise, what year clutches could I make work on this? I can find a few in the 04 to 06 range, but nothing for 07 or 08 in my area.
This was a suprise to me especially since I have a trip coming up this Saturday. Had a vibration that I had assumed was just a misaligned track.
It is a 2008 summit 800r