Changing weights on team clutch

bopper · Feb 12, 2017

Hey guys I've searched YouTube and Google for some basic instructions for changing clutch weights on these new team clutches but haven't found anything. I've done it on my old 14's but not the teams any instructions would be great!

Sent from my iPhone using Tapatalk

CB.8 · Feb 12, 2017

If you can do a 14 the team is easy. Remove the clutch cover. Loosen bolt holding weight. Pay attention to the shims on each side of the weight. Remove weight. Insert new weight with a shim on each side of the weight. Insert bolt. Tighten nut. Repeat two more times. Re-install cover making the 'x's line up. Tighten cover bolts to 14 ft pounds. Ride.

bopper · Feb 12, 2017

Done and done! Thank you I just wasn't sure about pulling the cover off without someone saying so!

Way better design then the 14's

Sent from my iPhone using Tapatalk

Search

Changing weights on team clutch

bopper

Well-known member

CB.8

Skidoo hill crew

bopper

Well-known member

Similar threads