But no, that would be way too easy, because there was a Second screw!!
And this one was a Son if a Gun to get out!
What a pain in the butt it was to get that screw out!
There was just enough room to get about 1/32nd of a rotation out of the socket for each cycle.
Took me a good 5 minutes to back that dang screw out.
Once the screws were out I realized that the hard plastic shell had really good grip on the tanks and there was NO WAY it was ever going to come lose on its own. Took a very solid tug before she came lose and lifted up off the propane tanks. Can't see any reason at all for it to be screwed in place as the tanks MUST come off the trailer to be filled?