S
Does anybody have a answer on if spi has made one or is going to have had great luck with there others for other sleds
Last edited by a moderator:
AFTERMARKET 2013-2015 pro rmk 800 fuel filter INFO/PART #'s
- Thread starter szotty
- Start date
Aftermarket filter
WPS (Western Power Sports) has them.
Same for 2013 - 2015 PRO -Chassis RMK's (PRO and Std. models... 600 and 800's)
WPS Part # 12-1164
$81.00 MSRP
Comparison: Stock Polaris filter. PN 2521189
MSRP $163.00
Street price $139.00
.
WPS (Western Power Sports) has them.
Same for 2013 - 2015 PRO -Chassis RMK's (PRO and Std. models... 600 and 800's)
WPS Part # 12-1164
$81.00 MSRP
Comparison: Stock Polaris filter. PN 2521189
MSRP $163.00
Street price $139.00
.
Last edited:
We've got those in stock.
The '13 - '15 filters have been added but like every other dealer, we will be waiting for the boat to show up sometime in late October (hopefully).
Last edited:
TTT.
Talked to them on the phone... they expect Mid October for arrival.
They are wholesale... So you have to be a WPS dealer to order.
IMO...place an order with a dealer...put them on back-order and you will be guaranteed to get yours when they come in the first batch.
The price is about $80 less than factory part and I would guess it comes from the same OEM supplier.
Same for 2013 - 2015 PRO -Chassis RMK's (PRO and Std. models... 600 and 800's)
WPS Part # 12-1164
Talked to them on the phone... they expect Mid October for arrival.
They are wholesale... So you have to be a WPS dealer to order.
IMO...place an order with a dealer...put them on back-order and you will be guaranteed to get yours when they come in the first batch.
The price is about $80 less than factory part and I would guess it comes from the same OEM supplier.
Same for 2013 - 2015 PRO -Chassis RMK's (PRO and Std. models... 600 and 800's)
WPS Part # 12-1164
WPS (Western Power Sports) has them.
Same part number for 2013 - 2015 PRO-Chassis RMK's (PRO and Std. models... 600 and 800's)
WPS Part # 12-1164
$81.00 MSRP
Comparison: Stock Polaris filter. PN 2521189
MSRP $163.00
Street price $139.00
.
Last edited:
B
How often do you think filter needs to be replaced if running good non-ethanol fuel?
Beginning of the season...
BUT...
Make sure that you have fresh fuel in the system... Drain ALL of last years gas before you put in the new filter.
Also... a good idea is... BEFORE you start the sled...drain out ALL the old gas, put in new clean gas... then run the fuel pump with the prime connector... this will flush all of the old fuel out of the injector rail so that stuff is not running through the injectors on initial startup.
THEN change the filter.
Changing that filter is a PITA.
BUT...
Make sure that you have fresh fuel in the system... Drain ALL of last years gas before you put in the new filter.
Also... a good idea is... BEFORE you start the sled...drain out ALL the old gas, put in new clean gas... then run the fuel pump with the prime connector... this will flush all of the old fuel out of the injector rail so that stuff is not running through the injectors on initial startup.
THEN change the filter.
Changing that filter is a PITA.
Last edited:
HI perf eng and Dennis kirk have a filter and its cheeper than WPS and anyone can buy it ..
Got a link to that for us Slash?
.
.
As long as none of the fuel system got changed from the fuel pump to the throttle body, you will use the 11'-12'. If nothing got changed in the chassis it is all still the 12' model year parts. If parts are needed for the engine, that will be the only 13' model year parts you will need.
well Dennis kirk no longer shows I cant bring HIperf over and post it and they only show up to the 13 model at 42.00 working down to the IQ at 24.00
The 2011/12 and 2013/14/15 filters are different and not interchangeable. the 11/2 has a different fuel tank-pump top than the 13/14/15.
The The 2013/2014/2015 PRO and RMK's have a 90˚ on the fuel tank end.
The other, less expensive ones, are a straight end for the 2011/12 ONLY. .... PLUS, the 2013+ do not need tools to release the fuel tank end. WPS, PERF-ENG, and Dennis Kirk are all the same cost on the 2011/12 filters.
I'm sure all three will offer the SPI for the 13/14/15's.
.
.
The The 2013/2014/2015 PRO and RMK's have a 90˚ on the fuel tank end.
The other, less expensive ones, are a straight end for the 2011/12 ONLY. .... PLUS, the 2013+ do not need tools to release the fuel tank end. WPS, PERF-ENG, and Dennis Kirk are all the same cost on the 2011/12 filters.
I'm sure all three will offer the SPI for the 13/14/15's.
.
.
Looks like we have this one listed for the 11-12 and is in stock. The 12-14 is out of stock right now.
http://www.gobigparts.com/SPI-FUEL-LINE-W-FILTER-120333.html
http://www.gobigparts.com/SPI-FUEL-LINE-W-FILTER-120333.html
GoBig... What is your price on the 2013-15 filters...When will you have them in?
.
.
Estimated date is october but I guess it depends on if one distributor gets them before my other distributor.
Here is the link to the other one on my site. Looks like I need to add some info because limited info imported to the site. I can clean that up. $60.26 plus shipping.
http://www.gobigparts.com/SPI-FUEL-LINE-W-FILTER-121717.html
Here is the link to the other one on my site. Looks like I need to add some info because limited info imported to the site. I can clean that up. $60.26 plus shipping.
http://www.gobigparts.com/SPI-FUEL-LINE-W-FILTER-121717.html
I fixed the description in the link for the 13-15.
Can I use these filters even though I run Av gas? I heard it will eat apart the aftermarkets?
