intake boot and polaris parts
- Thread starter mcfly13
- Start date
B
yes i buy almost all my parts from them. usually takes about 10-12 days to get your parts.
H
get new..I had pair of good ones but threw them out since they are so prone to failure.
If the item is in stock yes.
If out of stock ... they have dropped the ball from time to time.
WTF that is $100 less than you can order that same part from the dealer for ...
Man I got ripped off on buying that from the dealer ...
also I cant find any parts I need at all on there...
No intake boots, boost box, etc ...
Last edited:
Air intake and boost box assembly:
http://www.babbittsonline.com/pages/parts/viewbybrand/default.aspx
Tb Boots
http://www.babbittsonline.com/pages/parts/viewbybrand/default.aspx
Anything else you need you can go through the microfiche... it might take a few minutes to find it, but it is there...:beer;:beer;
EDIT: Well, it looks like I couldn't give ya a direct link to it, but jump through the hoops and you can find it, it is there...
http://www.babbittsonline.com/pages/parts/viewbybrand/default.aspx
Tb Boots
http://www.babbittsonline.com/pages/parts/viewbybrand/default.aspx
Anything else you need you can go through the microfiche... it might take a few minutes to find it, but it is there...:beer;:beer;
EDIT: Well, it looks like I couldn't give ya a direct link to it, but jump through the hoops and you can find it, it is there...
R
I cant find the intake boot gaskets has any body found them or the part #
Thanks Rob
Thanks Rob
??
Intake BOOT gasket??
no such part..either you mean throttle body intake BOOT or exhaust (y-pipe) gasket...
or am i missing something..:face-icon-small-con
throttle body intake boots p/n#1203917
(need 2) $43.15
Y-pipe gasket p/n#5812436
(need 2) $4.58
Intake BOOT gasket??
no such part..either you mean throttle body intake BOOT or exhaust (y-pipe) gasket...
or am i missing something..:face-icon-small-con
throttle body intake boots p/n#1203917
(need 2) $43.15
Y-pipe gasket p/n#5812436
(need 2) $4.58
R
I have v-force III reeds and there is a gasket on bolth sides of the reed cage flange. they may not be stock.
Thanks Rob
B
on the stock set up the gasket is molded rubber in the reed cage and don't use any separate gaskets. yes when you put the vforce reeds in they use gaskets
R
Dose anybody know where to get the gaskets.
Thanks Rob
Thanks Rob
B
