J
Hey guys I just have a question on the power valves on a 03 mountain cat 900 carb. What kind of symptoms would i see if the power valves were out of adjustment and if i need to replace that gasket if i take them out to clean them. Im looking in my book and it gives me a minimum center and maximum, so does that mean there is a range of measurment that is acceptable?
Second of all when I measured them the adjustment wasn't even close but the sled seems to run fine at high speeds so I'm a little concerned about the measurments on this item.
1.17/1.20/1.24
Those are the measurements for minumum/center/maximum. I get about 1.50 or maybe a little more then that when i measured them. So im a little confused but maybe you guys know something. Any help would be apriciated.
Second of all when I measured them the adjustment wasn't even close but the sled seems to run fine at high speeds so I'm a little concerned about the measurments on this item.
1.17/1.20/1.24
Those are the measurements for minumum/center/maximum. I get about 1.50 or maybe a little more then that when i measured them. So im a little confused but maybe you guys know something. Any help would be apriciated.