9
looking to run a big wheel kit with big wheels on the inside of the rails unlike the stock outter wheels on my 2001 rmk. Anyone know of a way to go about doing this? Ive seen it done before. Thanks.
looking for rear wheel relocation parts
- Thread starter 99RMKGUY
- Start date
H
I moved the stock back wheels inboard on both my 98 and 99. Not sure if it would be the same for putting big wheels on. Anyway, I just cut the idler shaft and spacer down enough to fit the wheels inside and cut the height down on the outside black plastic spacer to make a flat surface for the bolt to rest on. Moved the tensioner inside too. I also had to re-drill and tap the one end on the idler shaft that I cut down.
http://m.ebay.com/itm/140335370999?nav=SEARCH
There are other companies out there too
http://www.tricked-toys.com/Prodoffset.htm
http://quickrideengineering.com/dual-wheel-axle-kits/
http://www.tkicnc.com
There are other companies out there too
http://www.tricked-toys.com/Prodoffset.htm
http://quickrideengineering.com/dual-wheel-axle-kits/
http://www.tkicnc.com
You need just an offset, 2 wheel axle.... how big of wheel do you want to run?
