M miner700 Free Member Dec 9, 2007 119 1 18 montana Oct 10, 2008 #1 can someone please tell me what kind of compression a 2004 king cat should have thanks for all input
G grayghost New member Lifetime Membership Nov 29, 2007 227 4 18 Montana Oct 10, 2008 #2 Depends on your elevation, @ 3300 ft I usually see 135-140 on a stock head that hasn't been cut. The higher your elevation the lower your comp.
Depends on your elevation, @ 3300 ft I usually see 135-140 on a stock head that hasn't been cut. The higher your elevation the lower your comp.
A Arctic Thunder Well-known member Dec 7, 2001 2,079 785 113 Lewiston, Idaho Oct 10, 2008 #3 I had 153psi both sides, 2000'. 03.5 900.
D diggerdown Well-known member Apr 25, 2004 3,452 677 113 Deer Park Wi. Oct 10, 2008 #4 04 runs around that 150 mark at 1000', the 03's were a few pounds more.
M miner700 Free Member Dec 9, 2007 119 1 18 montana Oct 11, 2008 #5 i am about 4200 feet and my compression is 120
D diggerdown Well-known member Apr 25, 2004 3,452 677 113 Deer Park Wi. Oct 11, 2008 #6 Seems a little low. Any porting done? Porting and deck height will change it quite a bit. If not, it is getting close to the time to freshen it up! Check it with a different guage before you get too carried away, I've seen some off 15 to 20 lbs.
Seems a little low. Any porting done? Porting and deck height will change it quite a bit. If not, it is getting close to the time to freshen it up! Check it with a different guage before you get too carried away, I've seen some off 15 to 20 lbs.
