C
I am looking for an enclosed 2 place aluminum snowmobile trailer.
It has to be within 600 miles of central Colorado.
It needs to be at least 13’ feet long inside without the nose, at least 8’ wide, at least 6’ tall inside.
Dual axles, breaks, drive in/out, not a clam shell or goose neck type trailer.
It’s a Sledbed made by Newmans Inc http://www.newmansinc.com/trailers.html
The square part of the trailer is 20’X8.5’ (without the nose)
Drive on/drive off trailer. Front ramps act as slush guards. Back ramp tucks in the back.
It has brand new ¾ treated deck (this fall). Have receipt from Lowes.
It has brand new electric breaks- 2 pair (this fall). Have receipt from local auto shop.
Let me make this clearer, the whole break housing, magnets, housing/everything, not just the pads.
Both front ramps have new piano hinges, welding done right by Cooks Welding in Silverthorne CO.
It has tires that were put on last year. Bearings are also good. Spare tire attached underneath.
Jack with a wheel on the bottom that’s removable
8 track grips that the sled park on for traction when taking off (not installed yet when pic taken)
Ski runners/guides (not installed yet when pic taken)
Wood was treated before the runners and grips were put on.
No electric issues, lights are all fine
4 tie downs, the big ones
2”ball, Round 7 way plug, Clear title
You can see from the pictures that the frame was complete inspected while the wood was off.
It would make for a great atv, snowmobile, raft trailer, quad, or dirt bike hauler.
It holds four 162” sleds without problems.
Call or email me at uready2@yahoo.com 970 417 1721 thx Ross
It has to be within 600 miles of central Colorado.
It needs to be at least 13’ feet long inside without the nose, at least 8’ wide, at least 6’ tall inside.
Dual axles, breaks, drive in/out, not a clam shell or goose neck type trailer.
It’s a Sledbed made by Newmans Inc http://www.newmansinc.com/trailers.html
The square part of the trailer is 20’X8.5’ (without the nose)
Drive on/drive off trailer. Front ramps act as slush guards. Back ramp tucks in the back.
It has brand new ¾ treated deck (this fall). Have receipt from Lowes.
It has brand new electric breaks- 2 pair (this fall). Have receipt from local auto shop.
Let me make this clearer, the whole break housing, magnets, housing/everything, not just the pads.
Both front ramps have new piano hinges, welding done right by Cooks Welding in Silverthorne CO.
It has tires that were put on last year. Bearings are also good. Spare tire attached underneath.
Jack with a wheel on the bottom that’s removable
8 track grips that the sled park on for traction when taking off (not installed yet when pic taken)
Ski runners/guides (not installed yet when pic taken)
Wood was treated before the runners and grips were put on.
No electric issues, lights are all fine
4 tie downs, the big ones
2”ball, Round 7 way plug, Clear title
You can see from the pictures that the frame was complete inspected while the wood was off.
It would make for a great atv, snowmobile, raft trailer, quad, or dirt bike hauler.
It holds four 162” sleds without problems.
Call or email me at uready2@yahoo.com 970 417 1721 thx Ross