T
I was wondering how long it would take to remove and install a apex tunnel on a 04 RX-1
Changing a Tunnel
- Thread starter Turbo Monster
- Start date
M
Probably in the 20 hour range if it's your first time.
M5
M5
S
worth every second
took me a little less than two days. drilling the rivets takes 90 percent of the time. if you use the factory yamaha multi-grip rivets you wont regret it. it pulls the pieces together and clamps it tight. two bucks per rivet though. i was very happy with how mine came out. the only thing i might do different would be use the shorter rx-1 coolers and you could cut down the sides of the tunnel and taper it with a VE grab bar for the aftermarket tunnel look. looks similar to 09' M8. like i did to my m7 in the last photo.:beer;:beer;
took me a little less than two days. drilling the rivets takes 90 percent of the time. if you use the factory yamaha multi-grip rivets you wont regret it. it pulls the pieces together and clamps it tight. two bucks per rivet though. i was very happy with how mine came out. the only thing i might do different would be use the shorter rx-1 coolers and you could cut down the sides of the tunnel and taper it with a VE grab bar for the aftermarket tunnel look. looks similar to 09' M8. like i did to my m7 in the last photo.:beer;:beer;
