I have heard some guys talking about sealing above the shock towers to keep snow out, can anyone shed a little more info on where and what to seal on a proclimb?
keeping snow out
- Thread starter racert17
- Start date
C
It it quite easy, just put a big light source under the hood, out out the lights elsewhere, and see all the places lights finds it way out 
And start sealing
And start sealing
C
But first I would frogskin the sled in all places where the sled can get snow in! Mine is a huge is lump under the hood around clutches and exhaust side after a day on the mountains and in the woods.
Do that first and thats a good start
Do that first and thats a good start
L
i will take some pics for ya tonight as i have to finish sealing my sled up aroudn the shock towers tonight.
I had a lot of water and snow come in the left foot well by the clutches so I used black gorilla tape and sealed up the footwell as best I could. Not sexy but functional
L
pics as promised
here is 4 pics 2 of the side panel with the re shaped screen in the panel and the tape over the shock tower/a-arm mounting points.
here is 4 pics 2 of the side panel with the re shaped screen in the panel and the tape over the shock tower/a-arm mounting points.
R
my m8000 leaks snow like crazy, good idea with the light :light: thanks for the picture
L
no problem, also around the bumper mount area, there is a gaping squar hole, tape over it to.
What about the huge gap at the back of the side panel?
While sitting on the sled u can put ur hand through the gap and grab the secondary!
While sitting on the sled u can put ur hand through the gap and grab the secondary!
L
i leave that one open, lets air out. never had any go in that way. plus the foam in the side panel mostly blocks it.
K
Black silicone works good too, can't see it.
1
Have they addressed any of these issues on the 14's?
