axys sks 3" track swap?

raleigh111 · Nov 10, 2017

can it be done? i googled and could not find a direct answer? I know you can put a 3' on a older pro as did mine last year with a driver swap. I was looking at buying a sks and wondering if it could be done? Sorry if it has been answered but i did not see it.

I did find this but the thread died?
https://www.snowest.com/forum/showthread.php?t=402722

frontierfire · Nov 11, 2017

I just put the casmo 280 on my new Axys RMK had to replace drivers with new Avid ones

gonehuntnpowder · Nov 12, 2017

Is the chaincase in the same place as the rmk? If so its avid 7 tooth drivers, trim the rails, and an anti stab kit. Works great. I took the 163 2.6 off mine and put a 174 3.0. I took off the stock belt drive and did the tki. Not really sure what's unique about the SKS.

SRXSRULE · Nov 12, 2017

Sks has a front cooler. The main issue is with track clearance, even with 7tooth drivers.

Sheetmetalfab · Nov 12, 2017

SRXSRULE said:
Sks has a front cooler. The main issue is with track clearance, even with 7tooth drivers.

It fits just fine.

mountainhorse · Nov 12, 2017

SMF.... How much clearance though??

.

Sheetmetalfab · Nov 12, 2017

mountainhorse said:
SMF.... How much clearance though??

.

Exactly the same.

The non cooler tunnel front extrusion have ribs running across them at bolt points. (Bolts in each end)
The cooler fills the area between them on the sks.

My 16 162x3 has 1.25” in front of the track.

The tightest spot is on top at 7/8” to the front edge of the strip coolers.

Search

axys sks 3" track swap?

raleigh111

Free Member

frontierfire

Well-known member

gonehuntnpowder

Well-known member

SRXSRULE

Well-known member

Sheetmetalfab

Well-known member

mountainhorse

Well-known member

Sheetmetalfab

Well-known member

Similar threads