2020 alpha add ons

powwow · Apr 18, 2019

Anything a 2020 alpha (mountain cat) would need added on from stock. Primarily boondocking. Haven't been on a cat since my 2010 m8. Coming of a 2017 Axys. Looking to see if there are some little things that work better for the chassis, or are they pretty setup out of the box. Thanks

kiliki · Apr 18, 2019

run pretty good out of the box. You will need a good front bumper if you ride much in the trees. a can and muff pot and in most cases gas and oil.

Idcatman3 · Apr 18, 2019

kiliki said:
run pretty good out of the box. You will need a good front bumper if you ride much in the trees. a can and muff pot and in most cases gas and oil.

I'm having a hard time thinking of a case where you wouldn't need gas and oil.

ultrasks700 · Apr 18, 2019

windshield bag
tunnel bag
bumpers
running boards
light weight muffler
CFR handlebars

great places to start

Reddragon800 · Apr 18, 2019

Y-pipe
Stainless muffler
front bumper
boards
clutch kit

backcounrty800 · Apr 18, 2019

Tki brake lever!
Can
Make sure your shocks are set up properly!!!

TyDwyer33 · Apr 18, 2019

My build list so far is:

Iceage Elevate
HPS Can
Running Boards (unsure of brand)
CFR Boondocker 2.0 Bars
Front And Rear Backwoods BMP Bumpers
Muff Pot
Clutching

So far thats it , will get bigger as usual lol.

2020 MC A1 Also

Turblue · Apr 18, 2019

Anyone been doing any intake sealing or adding a mountain fit defender on their 19 alphas ? Thinking that’s a must do on a 2020

sno*jet · Apr 18, 2019

skis first

ak · Apr 18, 2019

Brake lever ( stock one can break easily)
Something to protect the chaincase, they can break very easily if hit.
And better steering bushings, your stock ones will wear out in less than 300 miles.

summ8rmk · Apr 18, 2019

Seal the intake, that is important!
Everything else is a preference.

Legends ZX2 SR

jakey-boy · Apr 18, 2019

My 19 is the least modified sled I have ever rode. Mine has a can and a defender intake.

I did the intake because I already had it I don't know that the benefit is that great. The biggest issue is still not addressed which is where the hood meets the air box.

Elevate was just added and still to be determined if needed. Everything else is pretty good put that money towards more days on the snow.

ullose272 · Apr 18, 2019

I plan on doing
Running boards,
Silencer,
Bdx intake headlight delete.
Belt drive.
Hoping to lose about 30 lbs off the front of the sled

Sent from my Pixel 3 using Tapatalk

summ8rmk · Apr 18, 2019

ullose272 said:
I plan on doing
Running boards,
Silencer,
Bdx intake headlight delete.
Belt drive.
Hoping to lose about 30 lbs off the front of the sled

Sent from my Pixel 3 using Tapatalk

I think SLP y-pipe and pipe are 10lbs lighter, then the Diamond S ti can is 14lbs lighter.

Legends ZX2 SR

ullose272 · Apr 18, 2019

Was just going to do the diamond s for -17 lbs. Intake for -8lbs. And belt drive for another 7ish lbs

Sent from my Pixel 3 using Tapatalk

ullose272 · Apr 18, 2019

summ8rmk said:
I think SLP y-pipe and pipe are 10lbs lighter, then the Diamond S ti can is 14lbs lighter.

Legends ZX2 SR

It was my understanding you needed a fuel controller as well for the pipe that adds $350 to the price. I was thinking about getting the stock pip ceramic coated though

Sent from my Pixel 3 using Tapatalk

powwow · Apr 18, 2019

ullose272 said:
It was my understanding you needed a fuel controller as well for the pipe that adds $350 to the price. I was thinking about getting the stock pip ceramic coated though

Sent from my Pixel 3 using Tapatalk

Is there any pipe for the Ctec that doesn't need a fuel controller?

summ8rmk · Apr 18, 2019

powwow said:
Is there any pipe for the Ctec that doesn't need a fuel controller?

Stock.
In 07-09, cats didn't need a controller to run SLP.

Legends ZX2 SR

Chewy22 · Apr 18, 2019

powwow said:
Is there any pipe for the Ctec that doesn't need a fuel controller?

BMP!

MTN_VIPER · Apr 18, 2019

ullose272 said:
It was my understanding you needed a fuel controller as well for the pipe that adds $350 to the price. I was thinking about getting the stock pip ceramic coated though

Sent from my Pixel 3 using Tapatalk

Not 100% sure, but I think that the pipe is ceramic coated Black from the factory. If it's paint, then it's damn good paint as mine still looks new after 900 miles!

2020 alpha add ons

Well-known member

Well-known member

MODERATOR: Premium Member

Well-known member

Well-known member

Well-known member

Well-known member

Well-known member

Most handsome

Well-known member

Well-known member

Most handsome

Well-known member

Well-known member

Well-known member

Most handsome

Well-known member

Well-known member

Similar threads