2
A buddy just picked up a 16 Axys 155 x2.6 with Sidekick. Only about 450 miles on sled but was purchased remotely. Yesterday was it’s first day on the snow for my buddy and there are issues. Allegedly it’s clutched for 8-10k ft which is where we ride; we will be tearing into it to confirm.
The symptoms are weird, if you clamp the throttle it’ll jump to 8,400 RPMs for literally just a second and then quickly drop back down to 7300-7400, if not less. If you keep it clamped at this 7300 RPM it’ll start bogging in and out and even backfire sometimes. It’s not throwing any codes.
I’m new to turbos myself so we’re trying to figure out where to start. Obviously we’ll be calling Boondocker tomorrow but seeing if there is any advice on here too. Any help or starting points would be greatly appreciated.
Sent from my iPhone using Tapatalk
The symptoms are weird, if you clamp the throttle it’ll jump to 8,400 RPMs for literally just a second and then quickly drop back down to 7300-7400, if not less. If you keep it clamped at this 7300 RPM it’ll start bogging in and out and even backfire sometimes. It’s not throwing any codes.
I’m new to turbos myself so we’re trying to figure out where to start. Obviously we’ll be calling Boondocker tomorrow but seeing if there is any advice on here too. Any help or starting points would be greatly appreciated.
Sent from my iPhone using Tapatalk