out in west yellowstone with a silber turbo pro rmk and whenever it gets arround 6000 rpm or so it gos into det
Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
It is important that the red and blue lights display when any pressure is built. Do you have the solenoid installed so that the side with 2 ports faces the throttlebody?
Just to add a little, green/blue under boost is ok too. It should only go red/blue under full throttle and boost.It means that there is a problem. This is the mode the controller should go into when under boost. If it doesn't not make sure the solenoid is facing the right direction and the lines are good to the controller.