What gears should I order for a stock driver 7psi Axsys belt drive 10k elevation 29 top 63 bottom?
TKI what to order
- Thread starter KAWGRN
- Start date
Just remember that Tom's ending gear ratio's are based on 8 tooth drivers-
I went through this when I swapped my 7's on my Axys to 8's- and talked to Tom in depth on the ratios before I came up with a ratio that worked best for my riding style.... now this was on a stock QD belt drive system switching to his Belt system.
Just an FYI
I went through this when I swapped my 7's on my Axys to 8's- and talked to Tom in depth on the ratios before I came up with a ratio that worked best for my riding style.... now this was on a stock QD belt drive system switching to his Belt system.
Just an FYI
Last edited:
Understood , so I’m keeping the stock 7 tooth drivers so was thinking 29 top and 63-64 bottom 2.17 with 8 tooth
Last edited:
29-63 it is 2.33 with 7 tooth sounds like The sweet spot! Wondering about the 8 tooth drivers now?
