My 06 X 800 and 04 Mod 860
show your REV
- Thread starter steveo10
- Start date
Nice lookin sleds. I like the Blacked Out Mod, Cool tunnel also.
How do you like the Simmons Skis on the other one?
I put a set of Simmons on for this year on my 04 Summit X 800 along with narrowed the front end to 35.5
Wildcard
How do you like the Simmons Skis on the other one?
I put a set of Simmons on for this year on my 04 Summit X 800 along with narrowed the front end to 35.5
Wildcard
Thanks! The Mod even has the bulkhead powder coated black. i like the Simmons but their the only ski i've had on my Rev's (since Jan. 05) So I can't compare them to any others.
B
Tell us more about the tank ,Carbon side panels?Very nice
B
Thanks. They are sure a good tough looking sled. Excited to try out my new 4130 built chromoly boards.. The side panels are C3 RT 1000 to REV Conversion Carbon Fiber Panels and the gas tank is also C3.
Custom Tunnel
Boss style seat
all nuts and bolts-Titanium
4130 Running Boards
1/2" aluminum tube grid full length cooling system
Headlite delete
fully vented
Toe wells cut out
/K&Ns, BMP can/ pipe-no idea.
Boondocker and Koso
CMX Belt Drive
Clickers
Timbersled front end kit
!62" w/Easyride
2 wheel rear axle
Sly Dog 8" Powderhounds w/6" carbides
Custom Tunnel
Boss style seat
all nuts and bolts-Titanium
4130 Running Boards
1/2" aluminum tube grid full length cooling system
Headlite delete
fully vented
Toe wells cut out
/K&Ns, BMP can/ pipe-no idea.
Boondocker and Koso
CMX Belt Drive
Clickers
Timbersled front end kit
!62" w/Easyride
2 wheel rear axle
Sly Dog 8" Powderhounds w/6" carbides
B
also risers and drop and rolled
pic of cooling
pic of cooling
RT panel conversion. What did it take to fit them?
B
They fit the same on either sled. The RT's had wider side panels for more clearance for the 1000. So these panels were made to slim up the profile of the RT. If you want closeup pics lemme know. I may possibly be making a few sets of these panels in the next couple weeks as i will be doing a few sets of XM/XP panels.
L
i just painted a spare hood for my rev.
not much done to it
float 2's bikeman clutch kit and hps can
[/IMG]
not much done to it
float 2's bikeman clutch kit and hps can
S
Here's my clunker......a few more updates this year. SHR860 for another year :face-icon-small-hap
Last edited:
Sweet lookin sled and Engine Compartment,
I see your running the pod filters, Where did you locate the sensor that was on the air box or do you run a different computer box or something??
Wildcard.
Here is mine as it sat when I bought it. Pile of parts showed up last week and more to show up tomorrow. I will update with the new pics when I am fnished. :face-icon-small-coo
S
2006 Rev Adrenaline
-156" x 2 1/2" track
- Works front shocks
- Dynoport can
- 10" riser
- Updated XP skis
and yes, it does have the PRO colour scheme, but Bombi first did it back in '05 on the Renegade...95% complete. Still to come, WRP running board kit
Hello, almost done with my Rev rebuild swapped to a different chassis that had VE drop and roll kit installed, VE drop brackets, 151 cooler and extesion w/bumper, also installed 06 MXZ X front racing reinforced nun, cleaned everything all up, added a bunch of Mods, swapped out Snow Eliminators, installed 2011 XP freeride aluminum drop center bars, RSI grip heater and insulators, XRS panels with 2 Cool Air vents in the BR Tech smoke colored Hood, and 2 Cool Vents in mid area of the side panels, boots trimming mod to rear part of the panels, added K&N Unifilter until I get a set of kickass pods with outerwear socks on them. currently has Series 4 159x15x2 1/8 track.
Also going to install T Motion kit in the 08 XP 154 rails when the kit comes in on Dec 20th going to try to powdercoat rails same color as the new XM Rails and add the Tmotion sticker, and skid will be remounted and moved back to fit the 159 track it currently has. after t Motion comes in I will be purchassing a 163x16x2.5 and will break the outer rods on it for more flex
I have narrowed my stock front end a arms to a final 35.5 skid stance and installed Simmons Gen 1.
also added 06 Summit X seat, and snow break belt to tunnel.
[/IMG]
\
Wildcard
Also going to install T Motion kit in the 08 XP 154 rails when the kit comes in on Dec 20th going to try to powdercoat rails same color as the new XM Rails and add the Tmotion sticker, and skid will be remounted and moved back to fit the 159 track it currently has. after t Motion comes in I will be purchassing a 163x16x2.5 and will break the outer rods on it for more flex
I have narrowed my stock front end a arms to a final 35.5 skid stance and installed Simmons Gen 1.
also added 06 Summit X seat, and snow break belt to tunnel.
Wildcard
Last edited:
Very impressed bud! You ended up with quite the sled!
Hello and Thanks Reeb, still will be addin more I was at dealership today and they said my T Motion kit has been shipped and is expected to arive the end of next week cause of the holidays at the beginning of the week super excited to get the tmo in and get it installed in the sled.
Also I beleive I might be getting some goodies for sleddin season for Christmas, Yhae!!
Merry Christmas to ya and everyone, and Happy New Year.
Wildcard
Also I beleive I might be getting some goodies for sleddin season for Christmas, Yhae!!
Merry Christmas to ya and everyone, and Happy New Year.
Wildcard
Shock air pressures
Hi , I`m Ken, Iam new to this site, and I was looking at some of the pics of sleds and I saw yours. Very nice sled!!!:face-icon-small-hap I see you have a Holz rear suspension similar to mine with the same fox shocks. I just got the sled late last year and had a new track put on it last week and the shop that did the work dumped the air out of the shocks. I have no baseline starting point for the pressures and I was wondering if you could give me an idea where to start the pressures at?:face-icon-small-con Thank you for any info you can give me and I hope you have a good season of riding.:yo: Old mtn. man
Hi , I`m Ken, Iam new to this site, and I was looking at some of the pics of sleds and I saw yours. Very nice sled!!!:face-icon-small-hap I see you have a Holz rear suspension similar to mine with the same fox shocks. I just got the sled late last year and had a new track put on it last week and the shop that did the work dumped the air out of the shocks. I have no baseline starting point for the pressures and I was wondering if you could give me an idea where to start the pressures at?:face-icon-small-con Thank you for any info you can give me and I hope you have a good season of riding.:yo: Old mtn. man
Hello Ken, Welcome to the site awesome site around here, who are you askin this question too?
You can also find also to stuff in the search section in the upper heading bar the one with classified, garages, search etc.. type what you think and ya can come up with a bunch of info many awesome mod threads and info
New
Snowbunje easy access mod.
New Snowbunje handlebag bag setup I got for christmas, new 2011 freeride aluminum raised bars, freeride grips, RSI not grips insulators, also installed Lead dog helmet light
plugin wire is hidden between the handlebag bag and hanlebar pad, also see the easy acces snowbunjie location. Controls relocated to bottom or Riser.
In process of assembling my new T motion kit in some 08` xp rails almost done with it waiting on some parts to complete then the skid will be installed hopefully in the
next few days.
Wildcard.
Last edited:
