C caillou04 Free Member Dec 5, 2010 22 0 1 46 Oct 30, 2012 #1 on 600 ft if you change a 9t to a 10t drive sprocket do you have to gear stronger or faster Thanks
o2bncamo Well-known member Lifetime Membership Nov 7, 2009 189 50 28 wisconsin Nov 1, 2012 #2 You are gearing it faster (higher) by putting the 10 tooth on. If you want to keep the overall gearing the same, you'll have to gear it stronger (lower) by about 11 percent.
You are gearing it faster (higher) by putting the 10 tooth on. If you want to keep the overall gearing the same, you'll have to gear it stronger (lower) by about 11 percent.