Looking at my '08 M8 and then looking at the billet adapter and barb that BDX sent me, don't see how to install this thing. Seems like there should be another barb to put the adapter in-line. What am I missing here?
Installing the BDX Fuel Pressure Gauge Adapter
- Thread starter SaberKitty
- Start date
J
You remove the brass fitting on the bulkhead where your fuel line comes out of the tank. The brass fitting has an o-ring on the back that you will re-use. Thread on this new adapter and re-attach the fuel line. Thread in your gauge and you are done.
Main port to the tank - Check.
Hose barb to the fuel line going to the engine - Check.
Third port for the gauge - Check.
Thanks!
Hose barb to the fuel line going to the engine - Check.
Third port for the gauge - Check.
Thanks!
B
Does this have a guage that comes with it? If not, where did you get yours at? Pics would be nice if you could!
why spend 3X as much for a fuel pressure gauge? What am I missing?
X2. must like the looks I would guess
Bigger diameter, better resolution.
Cheap is as cheap does.
Cheap is as cheap does.
