T
looking for any information...putting a x3 162" on my buddies '12 pro, running into clearance issues with hitting the coolers directly above the 7 tooth avids. running a TKI belt drive for the '13 with the stock Polaris '13 belt drive plate(did this to gain gearing options for future upgrades). for suspension running a ezryde that we dropped approximately 1" from stock height to gain clearance at the rear of the tunnel. The issue we are running into is it appears we need to drop about 1/4" just to clear the coolers directly above the drivers. Any ideas why this is being a pain in my rear?!
