A
I knew I wanted something different for my new M8 as far as boards go, but had a hard time spending the $500 or so for the cadillac of boards (Skinz). I also was very reluctant on cutting up a brand new sled. Enter the EZ Boards by MadFab. No cutting, no grinding...just drill a few holes (which are marked out on the board inserts already), install some rivets and some caphead bolts for traction...done. Took me maybe 45 minutes and the end result speaks for itself.
Brother-in-laws stock M1000:
And my M8 with the EZ Boards installed:
Since snow does not stick to the plastic there is no need for more or larger openings in the boards. Didn't have to kick my boards to clear the ice and snow once the entire day. PM Madsigntist here on Snowest for more info and to order a set.
Brother-in-laws stock M1000:
And my M8 with the EZ Boards installed:
Since snow does not stick to the plastic there is no need for more or larger openings in the boards. Didn't have to kick my boards to clear the ice and snow once the entire day. PM Madsigntist here on Snowest for more info and to order a set.
