J
My driven clutch has to much play in the sheaves. What is the best thing to do now? buy a new 10.4? or can you buy the bushing? and where do you buy the bushing? cheaper to send somewhere to get fixed?
Broken secondary rollers, do they still sell the bushing?
- Thread starter jethrobodean
- Start date
It is more cost effective if you have a 10" clutch to upgrade to the 10.4" I assume this is on an M7? You will have to switch to the 0627-046 drive belt and the clearance under the belt is minimal, but it performs better. You can transfer your helix and spring over.
Let me know if you need help, we have everything on hand.
Let me know if you need help, we have everything on hand.
J
can you use the newer design 2012-15 driven clutch on a 08 M1000?
Last edited:
No. And really, I would not want to.
J
So how does your place work? Do I send in my 10.4 to you and you do your magic or do you sell the sheaves? And can I ask how much?
We have a couple options. If you have a 10.4 that has a damaged bushing now, you can send the complete clutch in and we will redo the bushing and replace any parts that are damaged like rollers/spring/helix/bolts. Then we balance the clutch and ship it back to you. We also sell parts individually if you want to do self repair.
A bushings replacement/repair usually runs around $180.00.
A bushings replacement/repair usually runs around $180.00.
