FYI... NEW 2013 PARTS FICHE IS ONLINE
- Thread starter mountainhorse
- Start date
THINGS LIKE THROTTLES
BELT DRIVES
DRIVESHAFTS/JACKSHAFTS
ETC
BELT DRIVES
DRIVESHAFTS/JACKSHAFTS
ETC
S
Ok so who is going to be the first to put together a parts lost for the belt conversion for 2011-2012?
G
According to the part #s the 2013 800 has different cylinder head, cylinder, basegasket, and crankcases from the 2012. Water pump housing and impeller are the same.
Could be different supplier,, could be bigger smile.
Could be different supplier,, could be bigger smile.
Last edited:
D
Can't be a lot of people who know about this....
2879085 KIT-BELT DRIVE
1332998 1 EA ASM-BACKER BELT 191.26MM
1332999 1 EA ASM-JACKSHAFT 15 SPL W/BRG
1911731 1 EA ASM-COMPL BRAKE SYS P/T 1/2
1911732 1 EA DISC-BRAKE 7"
3211146 1 EA BELT-QUICK DRIVE 68P 36W
3222204 1 EA SPROCKET-21T BELT 36MM 15 SPL
3222205 1 EA SPROCKET-44T BELT 36MM 15 SPL
5138275 1 EA BRACE-LOWER RH MACH
7080936 1 EA CAPLUG-#BPF-7/8"-6 BLACK
7518906 2 EA SCR-M8X1.25X25 8.8TXTR ZOD P80
7518953 1 EA SCR-M8X1.25X30 8.8 TR/TX ZOD
7519004 2 EA SCR-M10X1.25X20 8.8 HH ZOD P30
7519049 2 EA SCR-TXTH M8X1.25X35 8.8ZOD P80
7519236 1 EA SCR-HXFL-M6X1.0X16 8.8 ZYL NYL
7519243 2 EA SCR-HXFL-M8X1.25X25 8.8 ZODP30
7519260 3 EA SCR-TXTH-M8X1.25X20 8.8 ZODP30
7519338 2 EA SCR-RHCAR-M6X1.0X22 8.8 ZPC
7547332 6 EA NUT-M8X1.25,FLG,NYLOC-OLIVE D
7547505 4 EA NUT-HEX-M6X1.0 8 ZOD NYL
7556588 4 EA WASHER-6.2X14.25X2 ZC
7621467 7 EA RVT-3/16(.251-.375)ST-ST-LF-B
7661637 10 EA RIVET-3/16-.090-.290
9924077 1 EA INSTR-QUICK DRIVE KIT
9924158 1 EA INSTR-BELT INSTALL/HANDLING
9800081 1 EA BOX-18"X12"X10 -D.W. CUSTOM
9800483 2 EA BAG-BUBBLE WRAP,8X15 1/2
9810321 0.015 EA PACKING TAPE #250-3"
9820042 1 EA LABEL-4X2
9820044 1 EA POLY BAG-RECLOSEABLE 12X15.004
9820048 7 EA BUBBLE MASK-BMC-120,18"X6"PERF
2879085 KIT-BELT DRIVE
1332998 1 EA ASM-BACKER BELT 191.26MM
1332999 1 EA ASM-JACKSHAFT 15 SPL W/BRG
1911731 1 EA ASM-COMPL BRAKE SYS P/T 1/2
1911732 1 EA DISC-BRAKE 7"
3211146 1 EA BELT-QUICK DRIVE 68P 36W
3222204 1 EA SPROCKET-21T BELT 36MM 15 SPL
3222205 1 EA SPROCKET-44T BELT 36MM 15 SPL
5138275 1 EA BRACE-LOWER RH MACH
7080936 1 EA CAPLUG-#BPF-7/8"-6 BLACK
7518906 2 EA SCR-M8X1.25X25 8.8TXTR ZOD P80
7518953 1 EA SCR-M8X1.25X30 8.8 TR/TX ZOD
7519004 2 EA SCR-M10X1.25X20 8.8 HH ZOD P30
7519049 2 EA SCR-TXTH M8X1.25X35 8.8ZOD P80
7519236 1 EA SCR-HXFL-M6X1.0X16 8.8 ZYL NYL
7519243 2 EA SCR-HXFL-M8X1.25X25 8.8 ZODP30
7519260 3 EA SCR-TXTH-M8X1.25X20 8.8 ZODP30
7519338 2 EA SCR-RHCAR-M6X1.0X22 8.8 ZPC
7547332 6 EA NUT-M8X1.25,FLG,NYLOC-OLIVE D
7547505 4 EA NUT-HEX-M6X1.0 8 ZOD NYL
7556588 4 EA WASHER-6.2X14.25X2 ZC
7621467 7 EA RVT-3/16(.251-.375)ST-ST-LF-B
7661637 10 EA RIVET-3/16-.090-.290
9924077 1 EA INSTR-QUICK DRIVE KIT
9924158 1 EA INSTR-BELT INSTALL/HANDLING
9800081 1 EA BOX-18"X12"X10 -D.W. CUSTOM
9800483 2 EA BAG-BUBBLE WRAP,8X15 1/2
9810321 0.015 EA PACKING TAPE #250-3"
9820042 1 EA LABEL-4X2
9820044 1 EA POLY BAG-RECLOSEABLE 12X15.004
9820048 7 EA BUBBLE MASK-BMC-120,18"X6"PERF
According to an online Polaris OEM parts site, the above kit (2879085) is $738.
D
MSRP is $899.99
won't a 11 convertion be easier because the case is not bonded ?
Nice job Dragon!!
Re-uses the steel 2011/12 drive shaft from your sled.
Great price for a belt drive system.
I hear they will be available in "kit form" from Polaris sometime in Nov/Dec.
Should be an easy swap.. one evening.
Re-uses the steel 2011/12 drive shaft from your sled.
Great price for a belt drive system.
I hear they will be available in "kit form" from Polaris sometime in Nov/Dec.
Should be an easy swap.. one evening.
Last edited:
Is it any cheaper without the box, bubble wrap and polybags etc.:face-icon-small-ton
Also, you would need to buy the Lord 406/19GB adhesive and applicator for proper installation as it is not included in the kit. Same for the C3 kit.
Advantage of the C3 is that you have different ratios available to you.
Advantage of the C3 is that you have different ratios available to you.
Just got the word from " Freeagent " (Michelle) on the forums here..
Gotta luv the price!!
2879085 KIT-BELT DRIVE
Gotta luv the price!!
2879085 KIT-BELT DRIVE
Last edited:
And this is where you would contact HM Turbos for their belt drive pulley options.
http://www.snowestonline.com/forum/showthread.php?t=313963&highlight=hm+turbos
I apologize if i missed it somewhere, but do we know the weight differance, both stagnant and rotating, between the chain case-c3 belt drive- and Polaris belt drive?
The belt drive kit has been discontinued.
http://www.snowestonline.com/forum/showthread.php?t=307254&highlight=belt
I posted weights of the chaincase (minus oil) and C3 belt drive in this thread. C3 belt drive probably weighs a tad more than the polaris belt drive since it has a tensioner...but the tensioner isn't rotating weight so that makes a difference.
