M
Going to a 144...who makes the best one? just want to see some feedback reviews and pics
Thanks
Thanks
Best tunnel extension for an IQR
- Thread starter MAD MATT
- Start date
I have the Van Amburg, I like it, i also know Tracks USA makes one but its not as stout with the mounting points. This is the sled i built last spring, i love it.
Home made $30
Home made $30
I would have to agree with this. Not only does it look good, Its cheap and you get the satisfaction of making it yourself!!
Home made $30
Hello, Nice IQR always wanted to build on I see that sled in the back of your truck around the valley here good lookins sled. I live in Clarkston and work in Lewiston.
Made my own too 144-159 04 Rev Summit X 800HO cost less that $50 I just need to polish the tunnel and the extension to make all the aluminum coloring look the same since now the extesion look 2 different shades of color but It works and it strong I like it
One day I want to do a Fabcraft tunnel mod on my sled they look awesome.
Wildcard
Home made $30
dang that looks good, well done sir! Making it yourself does make it that much better!
if you're interested purchasing one rather than the DIY i sell them, PM me for details
build pics...
I had a piece of tunnel bent to the right width by a local metal shop.
I had a plasma cutter, skill saw or jig saw would work. Aluminum flapper wheel to clean up the cuts. And I had a spool gun to weld it but you could probably take the whole sled to a welding shop and have the tubing welded in.
Also I clamped the two side pieces together while grinding on them so the match.
I had a piece of tunnel bent to the right width by a local metal shop.
I had a plasma cutter, skill saw or jig saw would work. Aluminum flapper wheel to clean up the cuts. And I had a spool gun to weld it but you could probably take the whole sled to a welding shop and have the tubing welded in.
Also I clamped the two side pieces together while grinding on them so the match.
I
VE all the way bro!
M
I did the VE Bumper kit (my sled is the one on the red stand on their website)
I like the foot boards that come with it, and it is an easy install. I used the 144" kit with a 150" track
I like the foot boards that come with it, and it is an easy install. I used the 144" kit with a 150" track
M
Hey would you happen to have the dimensions for the tunnel extension? Looking to make one As well but not sure on the length for the top piece and I don’t want to waste a piece of aluminum.build pics...
I had a piece of tunnel bent to the right width by a local metal shop.
I had a plasma cutter, skill saw or jig saw would work. Aluminum flapper wheel to clean up the cuts. And I had a spool gun to weld it but you could probably take the whole sled to a welding shop and have the tubing welded in.
Also I clamped the two side pieces together while grinding on them so the match.
Similar threads
