S
I have a 07 m1000 and would like to know how to check or adjust fuel pressure. i keep hearing about fuel pressures in adjusting for bd box numbers. will fuel pressure make a big difference in settings? Thanks!
07 m1000 fuel pressure adjusting
- Thread starter snowfun87
- Start date
Stock pressure is about 44 psi just above idle. You can make it richer or leaner by raising or lowering the fuel pressure. But if you have a power commander or boondocker fuel controller, then you shouldn't need to adjust the pressure.
IF you are on a modded m1000 then you need egts, fuel pressure should be 44-46 stock but tuning a 1000 with egts is not safe.
I usually ran my piped 1000 at 51psi and had way better performance. But that is tuned to run 1160* egt temps. and hold.
I usually ran my piped 1000 at 51psi and had way better performance. But that is tuned to run 1160* egt temps. and hold.
