I saw a guy over on TY had done this to a set of 8bu00's so I figured I'd give it a try.
I started with 8BU10's added a plate on each side with the 17.2 steel rivets. They now weigh in at 70 grams apiece.
The plates were cut on a bandsaw then clamped together and ground equaly.
I then installed them to the arms and then balanced the arms.
I started with 8BU10's added a plate on each side with the 17.2 steel rivets. They now weigh in at 70 grams apiece.
The plates were cut on a bandsaw then clamped together and ground equaly.
I then installed them to the arms and then balanced the arms.