• Don't miss out on all the fun! Register on our forums to post and have added features! Membership levels include a FREE membership tier.

Doo XM SP Clutching 2013-2015 ?

summitboy

Well-known member
Premium Member
Nov 26, 2007
2,146
851
113
Are there any differences in the stock clutching between 2013-2015 XM SP models ? Ramps and Springs etc ??
 

Dynamo^Joe

Well-known member
Lifetime Membership
Premium Member
Nov 26, 2007
1,204
1,385
113
Thunder Bay, ont
www.iBackshift.com
Exceptions in clutching on SP800E models is
2012 blue/purple primary spring with 413 low ele ramps
2013/14/15 yellow/green primary spring with 413 low ele ramps

All clutching 2012~15 SP800E, above 4000 feet is same in primary and secondary
  • Pl/Pk primary
  • 441 ramps
  • pins
  • 40 helix
  • blue secondary spring
 
N
Dec 18, 2012
170
61
28
Bothell, Wa
Exceptions in clutching on SP800E models is
2012 blue/purple primary spring with 413 low ele ramps
2013/14/15 yellow/green primary spring with 413 low ele ramps

All clutching 2012~15 SP800E, above 4000 feet is same in primary and secondary
  • Pl/Pk primary
  • 441 ramps
  • pins
  • 40 helix
  • blue secondary spring

What setup (ie rider weight/elevation etc) is stock xm setup ideal for? What I mean is that, ski doo will set up there clutch for a variety of riders and conditions but at some point in the combination of the two I assume it would be spot on.
 

winter brew

Premium Member
Lifetime Membership
Nov 26, 2007
10,016
4,332
113
56
LakeTapps, Wa.
Summit clutching is aimed at average weight rider from 6-9000ft. Lower, we have to add weight, higher remove weight.....at least to get correct rpm in the middle of clicker range..
 

Dynamo^Joe

Well-known member
Lifetime Membership
Premium Member
Nov 26, 2007
1,204
1,385
113
Thunder Bay, ont
www.iBackshift.com
The settings are for rider weight of 180~230 lbs.
attachment.php


2015 specs.jpg
 
Premium Features