• Don't miss out on all the fun! Register on our forums to post and have added features! Membership levels include a FREE membership tier.

Tether on 09 D8

J

Jkinzer

Well-known member
Nov 27, 2007
2,752
628
113
Lewiston, Idaho
its plug and play, i always leave my ignition in and there are two wires coming off the ignition that plug into the tether wires as long as you bought the polaris one
 
P

PalousePoo

Well-known member
Nov 26, 2007
882
173
43
60
Farmington, Wash.
If it's not a polaris one, make sure with the cap on the socket, these is NO continuity between the wires. The two wire plug attached with the key switch plug is where you plug in at. A crimp terminal, male, spade terminal will go into the polaris plug.
 
T

tahoermk

Member
Nov 26, 2007
208
22
18
Tahoe
Any one have the part number for the polaris tether described above that plugs right in? I looked on line and can't see all the pages for my sled, 09 d8.
thanks!!!
 

06 Dragon

Active member
Lifetime Membership
Dec 29, 2007
148
30
28
Central Alberta
It was an aftermarket unit. Cut the connector off crimped on the spade ends. Plugged it into the two wires by the ignition switch. Fired it up, pulled the tether and she shut down. Perfect! Taped it up. Good to go. Thanks Guys.
 
Premium Features