Jetting for 660 rmk

tracker · Mar 27, 2008

Hey guys,
I have an 07 660 and running 280 jets in the snowies. I've heard alot of people running 260s. Just looking for some input, but I don't want to melt it down!!!

sled_guy · Mar 27, 2008

That sounds super lean to me.

I have an '04 660 with bored carbs and run 330s at 8-10k.

sled_guy

tracker · Mar 27, 2008

mostly we're riding from 10500 to 11500 so we're a little higher (on the mountain that is) than what your running.

MARV1 · Mar 28, 2008

When I ran a 660 I ran the stock recommended jetting and it ran perfect.

GreyGoose · Mar 28, 2008

Beleive it or not but I am running 240-250's in my Carl's 660 IQ in the snowies. Bored carbs and stock 08' IQR pipe. My egt's are under 1200 and pistons and plugs look good. Pulls like a mother "u know what". Some would say it's too lean but I know another guy that is running the same jets in his 660 and it too runs great too. Just read your plugs and pistons if you put a leaner jet in with no egts. Good luck.

tracker · Mar 28, 2008

Thanks Goose, pm'd ya

Hillboy · Mar 29, 2008

I have a 685 in an iq cooke city I run 290, I believe the newer ho in the iq runs a much leaner jetting package than the edge chassis. Probably the pipe scavaging quality of the iq. The iq motor of my 685 also gets much better fuel mileage than sled guys 660 in and edge. So take that for what it is worth but at 290 I have never hit the det at cooke city

Hill

sled_guy · Mar 29, 2008

Sheez... I was running 340s in Cooke. No wonder I had to dump in gas on the way back from Top of the World.

I guess I'll lean it down and see if I can stick it.

sled_guy

Hillboy · Mar 30, 2008

Yah when I saw what you were running I figured you were trying to help the arabs with their fortunes

I had Dar at 330 and probably should have been closer to 320 and maybe she would not have had the full open throttle loading that I thought was from snow in the headlight plenum. Does't that thing have det?

sled_guy · Mar 30, 2008

Nope, no DET. Wish it did. I don't think the small blocks got DET until the HO motor.

sled_guy

IQRIDR · Mar 31, 2008

No but you can drill and tap the head in the same location as the HO motors and run the HO cdi, and you will have DET. I've got it set up on my 660 VES. And I run 420 jets but thats at close to sea level..

tracker · Apr 1, 2008

Thanks for the comments guys ALL info is appreciated!!!!!

Search

Jetting for 660 rmk

tracker

Free Member

sled_guy

Well-known member

tracker

Free Member

MARV1

Well-known member

GreyGoose

New member

tracker

Free Member

Hillboy

Free Member

sled_guy

Well-known member

Hillboy

Free Member

sled_guy

Well-known member

IQRIDR

Well-known member

tracker

Free Member

Similar threads