M
Time to start a new project and since im done ridding for the year its for sale.
Chassis started as a 2005 with tunnel damage. Damaged area was removed and the extension is in its place.
2009 updated 800 CFI motor (pulled from my personal 09 IQ RMK along with all electronics) Approx 1400 miles total on motor. It has never went down. About 400 miles on it since the Poo update.
Stock pipe cut to fit, SLP silencer bought in pieces and welded to fit.
159" EZ Ryde rear suspension with Exit shocks
43" Z Broz front suspension with Exits shocks
2009 IQ RMK custom cut spindles
Front cooler delete
SnowStar front bumper
Lexan BR Tech hood with there vents and 2" flowrites
RR Oil injection bottle
Trail Tank 10.5 gallon fuel tank with custom mounted IQ RMK fuel pump
159" X 2.4" lug Polaris track off a 2006 900 RMK
Meathooker Feethookers
Custom tunnel extension
pro rmk snow flap
Custom dual pass U cooler (Temps run 125-128 all day)
Slide kick scratchers
Craigger built fuel rack
Poo shovel bag (shovel not included)
Rox adjustable riser
RSI chromemoly bars
Assault handwarmer elements
RSI Grips
SLP Powder Pro skis with Carls cut
PIAA lights mounted on riser
Power Commander 5
Almost everything is powder coated. Very little bare aluminum. Alot of time and money invested.
Time for another project.
Sled is located in Minnesota north of Forest Lake about 8 miles off 35.
$9000 OBO
Couple things wrong with sled.
1. Needs a windshield if desired (i busted mine will rolling it to get unstuck)
2. Exhaust side vent has a small hole in it that the pipe melted in there
3. Wrap is orange pealed looking i think from how thin the hood is and the heat coming thru?
Chassis started as a 2005 with tunnel damage. Damaged area was removed and the extension is in its place.
2009 updated 800 CFI motor (pulled from my personal 09 IQ RMK along with all electronics) Approx 1400 miles total on motor. It has never went down. About 400 miles on it since the Poo update.
Stock pipe cut to fit, SLP silencer bought in pieces and welded to fit.
159" EZ Ryde rear suspension with Exit shocks
43" Z Broz front suspension with Exits shocks
2009 IQ RMK custom cut spindles
Front cooler delete
SnowStar front bumper
Lexan BR Tech hood with there vents and 2" flowrites
RR Oil injection bottle
Trail Tank 10.5 gallon fuel tank with custom mounted IQ RMK fuel pump
159" X 2.4" lug Polaris track off a 2006 900 RMK
Meathooker Feethookers
Custom tunnel extension
pro rmk snow flap
Custom dual pass U cooler (Temps run 125-128 all day)
Slide kick scratchers
Craigger built fuel rack
Poo shovel bag (shovel not included)
Rox adjustable riser
RSI chromemoly bars
Assault handwarmer elements
RSI Grips
SLP Powder Pro skis with Carls cut
PIAA lights mounted on riser
Power Commander 5
Almost everything is powder coated. Very little bare aluminum. Alot of time and money invested.
Time for another project.
Sled is located in Minnesota north of Forest Lake about 8 miles off 35.
$9000 OBO
Couple things wrong with sled.
1. Needs a windshield if desired (i busted mine will rolling it to get unstuck)
2. Exhaust side vent has a small hole in it that the pipe melted in there
3. Wrap is orange pealed looking i think from how thin the hood is and the heat coming thru?
Last edited:
