lets see what ya did to your revs over the summer
- Thread starter wardy
- Start date
thanks
D
not too much, 2 wheel rear axle kit, whaul bro anti ratchet 10's, ported track, SPI head, SPI Pipe and can, currently porting and polishing it and having the a arms powder coated blue, bout 8 lbs of weight removed, and smaller lights. only got a 144 i call it shorty
S
Hey Wardy, did you just wire those lights into the existing wiring harness going to the stock headlights? Did you use the high or low beam?
Thanks
Thanks
they are wired into the factory wiring to toggle on the dash(i removed the gay handle bar switch housing and used toggle switches) i believe i used the low beam wire,,since these light dont hi beams
D
How did you attach it, just hot clue it in?
S
all ive done is tear down the top end... waitin for the pistons to come in. change the plugs and belt fill the oil/gas/nos good for another season
6 more days til my 1st ride. pistons better come quick!!!!!
6 more days til my 1st ride. pistons better come quick!!!!!
fox floats, summit a-arms/spindles, fly racing 8'' riser powercoated flat black, fly racing carbon fiber bars, boondocker nitrous system, jt's cusom vent kit. maybe more cant remember.
Here's mine. '05 Summit 144
Just finished painting the rails, and rear bumper blue to match the vent kit. Also added a Boss highrise and rumble pack can. Relocated rear wheels to inside the rails and removed the ugly rear rack and relpaced with an slp LED. Now just doing the snow dance.
Just finished painting the rails, and rear bumper blue to match the vent kit. Also added a Boss highrise and rumble pack can. Relocated rear wheels to inside the rails and removed the ugly rear rack and relpaced with an slp LED. Now just doing the snow dance.
C
Just installed these shocks cant wait to see how they do:beer;
