C
These are not ceramic coated. Have EGT bungs. Custom front dump 33mm stingers. $275. I'll try to get pics up later today.
Cat 800/900/BB SLP twins w/stingers
- Thread starter catsass
- Start date
C
pics.
C
These are made to give the electronics more room on the foot well tower. The stingers are all tig welded and really are quite nice. Just repacked, but you can unscrew the bottoms and repack as needed...not welded solid.
K
so how did the sled run with the stingers
C
Had crank issues, so I never did get a great amount of time on it, but the guy who built my motor says all the testing, with similar engines as mine, has shown a couple hundred rpm gain over the canister. When I cut and pasted on my own J-pipes, I also noticed that the J-pipes that were on it were a mm or so less than 33 and the welder had some troubles and left a few boogers of weld in the junction, so I cleaned all that out and TIG welded the seam to make sure it was all clean and free. They were on a 990 BB with some extensive porting.
Last edited:
C
$230.
Similar threads
