We have 09 163 x's running Joes clutch kit, we like them but not quite getting all we want yet. Is there a better ramp out there for just a little harder finish than the stock 09 ramp? We don't want to drop any lower than the 15.3 grams of pin weight and sitting on click 4 already(where we want to be) we're at 6500, but heading to cooke at 10,000. Help anyone?
Hello. 15.3g up to about 8000 feet. 14.5g at 8500+ should be good.
A note - After a year of trying to get this spring made, I finally got them in. Tested in December and been sending them out in all the xp kits now with 441 ramps whatever the sled may be even if its an 07xrs and clutch using 441.
Spring is a 175/360.
Compared to the 160/350 this new Violet/white stripe offers about 10 lbs more force at 40mph track speed....which is then just good. :face-icon-small-hap
I would like the opportunity to help you extract more of what you want out of the kit, if you have questions then there is more potential that I can help out with. Please email me at info(at)mxzx-revzone.com
or
give me a shout 807.346.9701
or
message me here so I can call you and can get you this stuff before you hit cooke - and so I can go over what more you like to see out of the kit.
thanks
Joey