• Don't miss out on all the fun! Register on our forums to post and have added features! Membership levels include a FREE membership tier.

Carls 910 questions in a edge

05rmksteve

Well-known member
Staff member
Lifetime Membership
Premium Member
Sep 5, 2008
2,477
1,618
113
Brainerd, MN
I run both a mesh hood and stock hood on mine with no problems. What pipes are you running. I have the standard ves 800 slp twins.
 

05rmksteve

Well-known member
Staff member
Lifetime Membership
Premium Member
Sep 5, 2008
2,477
1,618
113
Brainerd, MN
What's the pipe support on the mag side look like. By the shock tower. If I remember right I had to modify mine so I had clearance for my mesh hood. I had the older version of pipes and it fit fine then I damaged those and bought the newer version and there was not as much clearance.
 

BILTIT

Well-known member
Premium Member
Apr 9, 2011
1,682
482
83
45
Lloydminster, SK
Both my proxr and 03 V-edge have slp twins and they are very close to the hood. I am just wondering if you have the wrong twins for the chassis? or the motor mounts are out of wack? Pics would help.
 

sled_guy

Well-known member
Premium Member
Jul 5, 2001
3,566
843
113
Riverton, Utah
On my 02 with the 910 and twins the one pipe all but touches the hood by the shock tower, otherwise good clearance.

They lay in there the same with a 910 as they do with the stock 800.

sled_guy
 
Premium Features