• Don't miss out on all the fun! Register on our forums to post and have added features! Membership levels include a FREE membership tier.

Anyone got a used piston for an 01 600 RMK?

R

redwolf_92

Active member
Feb 19, 2011
160
30
28
42
Wadena, Mn
Hey all, I just did a complete rebuild on an 01 600 RMK engine and I ended up piecing it back together with a few parts that I had around so that I could get it back out and ride for bit before the end of the season.

My issue is this. When I was putting it back together I had one oem piston and one wiseco piston. That doesn't bother me too much, but I didnt have the right wrist pin for the wiseco piston so put it together with the oem Polaris wrist pin. It fit tight in the piston, but left about a half inch of play between the circlips. Not enough to let the pin fall out, but it has been bugging me ever since I put it back together. So if anyone has an OEM big block 600 piston they want to get rid of I would be interested. Or if someone has a wiseco wrist pin I might be interested in that.

Ps- the sled has been running great so far
 
Last edited:
Premium Features