I ran a Zbroz 36" on my 2016 Axys for two years. Now I'm running the 850 with Polaris 36". My opinion is that I strongly prefer having the Polaris 36". The Zbroz is OK in the sense that it is strong and is 36" with all the benefits. But it has terrible downsides, namely A) wrecking your factory heim/ball joints to transfer them from factory arms to Zbroz arms. B) requires ghetto surgery on your spindles. C) Since you've robbed all the parts off your factory arms, they are worth nothing on used market. D) Inner pivot holder length sizing is wrong, fits too sloppy with one washer, too tight with 2 washers.
