S
For 14 pro thanks
Looking for heavy duty upper ball joint, heim joint
- Thread starter Searam
- Start date
Ive never broke a stock one but I used these on my race cars and timber sled front ends. Very good quality and LOTS of options. Your going to need to know the specs on the stock piece and search accordingly. Eric
http://www.qa1.net/rod-ends-and-related/rod-ends
The polaris ball joint is a chromoly piece as it is so upgrading will require going to a 7/16" diameter and drilling the spindle and A arm.
I've bent and broken quite a few of the poo ball joints but they are the shear point when running zbroz a arms.
I dont think you will easily find a replacement with the same misalignment angle that is stronger and or cheaper.
I've bent and broken quite a few of the poo ball joints but they are the shear point when running zbroz a arms.
I dont think you will easily find a replacement with the same misalignment angle that is stronger and or cheaper.
S
Alternative impact has them for 23 each, I have the impact 36 inch kit so these may not work for stock sled I think the threads are shorter
