What to do 4 upgrades

donbrown · Apr 16, 2018

Just bought 2 SKIDO 850's REV SP G4 154 3" with shot.

Already removed extra plastic around belt.

Ordered skid plates / covers

Please list a couple upgrades to get the most bang for the buck.

Get clutches worked on ?? Who Where $$?

LINQ tie downs and removable snowflap? $105

Larger storage compartment? $65

Lighter muffler & MUFFPOT? $300

BTW not gonna trade for a 165 3" .... Let the wheelies begin.

cacsrx1 · Apr 16, 2018

Big John clutch kit

t-rev8 · Apr 16, 2018

Tom's in sierra city! :face-icon-small-hapthey have everything you need

donbrown · Apr 16, 2018

cacsrx1 said:
Big John clutch kit

This BIG JOHN .... http://www.sledheadracing.net/

612-718-3861

Kit is very reasonable wants $295 and $30 for a better motor mount

donbrown · Apr 16, 2018

t-rev8 said:
Tom's in sierra city! :face-icon-small-hapthey have everything you need

Okay road trip to the SIERRAS ! ... Do they do clutch kits?

TruckeePoo · Apr 27, 2018

donbrown said:
Okay road trip to the SIERRAS ! ... Do they do clutch kits?

Yes, and it rips!! You’ll be very happy with it. Tom will also dial in any suspension needs you might have.

jdog1 · Apr 28, 2018

Dont waste your money on a can unless your doing it to mount a muff pot. Muff pot wont fit with shot.

snow-doo · Apr 28, 2018

Rev 4

Big John clutch kit,be sure to change secondary spring,Rasmussen front bumper HPS can lighten it up,Mountain fit 4 piece vent kit.Ride it like crazy, also keep track of chain and track tension.

Ox · Apr 29, 2018

summ8rmk said:
https://www.razorbackusa.com/product-page/3-0-edition-infrared-belt-temp-gauge

I am adding this one from another thread as it seems like at least as good of an idea as any, and it will be easier to find later in this here thread.

BTW - this is for belt temps.

.

summ8rmk · Apr 29, 2018

It is nice having the ability to watch the temps during the activity.

Daag44 · Apr 29, 2018

summ8rmk said:
It is nice having the ability to watch the temps during the activity.

It sure beats the infrared thermometer. Have you seen any on/off throttle type riding that leaves the belt to slip and shoot the temps up?

summ8rmk · Apr 29, 2018

Daag44 said:
It sure beats the infrared thermometer. Have you seen any on/off throttle type riding that leaves the belt to slip and shoot the temps up?

This is on my 2014.
Snow depth is the biggest factor.

Long(pinned) climbs create more heat than treed, slalom sidehillig.

Over 2ft of powder and temps are 220-230°f breaking trail on the road.

Spring riding, lots and lots of wheelies avg 180°f or less

donbrown · Apr 30, 2018

Ox said:
I am adding this one from another thread as it seems like at least as good of an idea as any, and it will be easier to find later in this here thread.

.

I asked about a gauge on this thread ...

https://snowest.com/forum/showthread.php?t=442219

Please post there since most replies said not necessary.

Daag44 · Apr 30, 2018

donbrown said:
I asked about a gauge on this thread ...

https://snowest.com/forum/showthread.php?t=442219

Please post there since most replies said not necessary.

I assume that you are thinking of a different thread, because there was no mention of it being unnecessary. Actually there was only one quick mention to monitor belt temps and no following comments.

Daag44 · Apr 30, 2018

summ8rmk said:
This is on my 2014.
Snow depth is the biggest factor.

Long(pinned) climbs create more heat than treed, slalom sidehillig.

Over 2ft of powder and temps are 220-230°f breaking trail on the road.

Spring riding, lots and lots of wheelies avg 180°f or less

Have you seen any difference with venting, belt guard and clutch alignment?

summ8rmk · Apr 30, 2018

I didn't add venting.
I did shim the secondary(both directions) with no change in temps.

Daag44 · Apr 30, 2018

summ8rmk said:
I didn't add venting.
I did shim the secondary(both directions) with no change in temps.

It would have been tough to see without having a way to measure belt temps in real time. This goes for any change that is made.

Ox · Apr 30, 2018

donbrown said:
I asked about a gauge on this thread ...

https://snowest.com/forum/showthread.php?t=442219

Please post there since most replies said not necessary.

Sorry, the one I linked to is for belt temps.
I edited the post.
I didn't realize that it wasn't in the post anywhere.
But if you open the link - it does say so there.

I have a transfer machine that needs a new HMI.
Not interested in dicking with one for a snowmachine....

.

onedoubles · May 6, 2018

jdog1 said:
Dont waste your money on a can unless your doing it to mount a muff pot. Muff pot wont fit with shot.

I put in a slp silencer can and attached a muff pot. My summit has SHOT.

donbrown · May 6, 2018

onedoubles said:
I put in a slp silencer can and attached a muff pot. My summit has SHOT.

Where did you mount the muff pot ... opposite of the SHOT between muffler and shock wall?

What to do 4 upgrades

Well-known member

Well-known member

Well-known member

Well-known member

Well-known member

Well-known member

Snowest's Axe Murderer

Most handsome

Most handsome

Well-known member

Most handsome

Snowest's Axe Murderer

Member

Well-known member

Similar threads