I have an '09 Summit. I would like to put longer adjuster bolts in the primary for the quick clickers to attach to. I have been told to use newer model year bolts. When looking up the part #'s, the '10's are a different # than the '11's. The '11's are $4 cheaper than the '10's. I am doing this to 3 sleds and that $4 adds up to quite a bit. Can I use the '11's or do I need the '10"s? Thanks for any help.
Quick clicker bolts
- Thread starter WIS.REV
- Start date
As far as I know, the bolt never received any updates til last year. If it were me, I would buy the '11 bolt.
'08 & 09 Part #417222955 $24/ea
'10 Part #417223197 $13/ea
'11 Part #417223460 $9/ea
'08 & 09 Part #417222955 $24/ea
'10 Part #417223197 $13/ea
'11 Part #417223460 $9/ea
The 11's are different and will not work...2010's are what you want.
Thanks!
0
I had the same trouble. 09 bolts are shoooort. I don't know if I got '10 or '11 bolts but they were longer and had numbers on the bolt. I scribed a little line instead of figuring out number on bolt head to clutch. The length is a big help as they only hung on by a thread before.
Similar threads
