OK folks...hope someone can help me. My engine turns over extremely tough and if im lucky enough to get it started it runs fine all day and starts warm but thats only if im lucky enough to get it started and even in plus 50F she is a monster to turn over...and this problem started a year ago and this unit has very few miles.
I take the belt off...no difference...i take the starter recoil off and wrap a rope around hub and still the same.
I have removed power valves and pipe and still the same.
If i remove one plug at a time still the same but with a plug removed from each cylinder then she rolls easy.
The pistons and cylinders are in awesome shape from what i see through the plugs\powervalves and exhaust.
I have never blown a belt on this machine but is it possible still my crank ended up out of phase..?? any help appreciatted..
I take the belt off...no difference...i take the starter recoil off and wrap a rope around hub and still the same.
I have removed power valves and pipe and still the same.
If i remove one plug at a time still the same but with a plug removed from each cylinder then she rolls easy.
The pistons and cylinders are in awesome shape from what i see through the plugs\powervalves and exhaust.
I have never blown a belt on this machine but is it possible still my crank ended up out of phase..?? any help appreciatted..