I know we have all done it but I thought I would send out a little trick. We have all fought trying to align the kit frame to the bike frame by ourselves because we were to excited to wait on our buddy to come over and help.
Here is my one man solution.
Set the kit on the floor with the strut rod installed on the TS kit lose. Remove the front forks from the bike. Yes, it's only 8 bolts and it makes your life so easy!!!!! Roll the bike forward so the front of the frame and front fender is touching the floor. This puts the bike frame and TS frame at equal angles so you can easily adjust the TS frame with one hand and feed the swing arm bolt through easily.
Here is my one man solution.
Set the kit on the floor with the strut rod installed on the TS kit lose. Remove the front forks from the bike. Yes, it's only 8 bolts and it makes your life so easy!!!!! Roll the bike forward so the front of the frame and front fender is touching the floor. This puts the bike frame and TS frame at equal angles so you can easily adjust the TS frame with one hand and feed the swing arm bolt through easily.
Last edited:
