W
Rev limiter on 2010mod 1200cc, what rpm?
1200 rev limiter?
- Thread starter Woody 1050
- Start date
A
Starts coming in at 8400.
Cliff Yeatman
Advanced Dyno
Cliff Yeatman
Advanced Dyno
P
Skidoo 1200 RPM Limiter
Rapid Bike 3 EFI on 1200 4Tec can be setup to 8750 RPM for boost or header setup on SkiDoo.
We will have more info tomorrow if we can setup to 9000 RPM
www.powderlites.com
Rapid Bike 3 EFI on 1200 4Tec can be setup to 8750 RPM for boost or header setup on SkiDoo.
We will have more info tomorrow if we can setup to 9000 RPM
www.powderlites.com
W
Thats what i find out to, had one with MCx 240hp Turbokit in my dyno, it did 242hp/8350rpm.
A
Yes we did runs to 8400 and thats where it feel off was right in that range.
Although we did make a far amount more HP.
Cliff
Although we did make a far amount more HP.
Cliff
W
With this 240 kit !?
A
Seadoo's 1500 motor will go to 9K if you put lightweight valves, retainers, and springs in it. Maybe the 1200 will be the same way.
A
yes it was 240 kit with 12.8Ib.s of boost and it made 264HP and we spun it to 8350 at 13 Ibs and it made a tad over 280hp.
A hint for you, don't run them at 18 IBs they tend to make a nice set of ashtrays.
Cliff Yeatman
Advanced Dyno
A hint for you, don't run them at 18 IBs they tend to make a nice set of ashtrays.
Cliff Yeatman
Advanced Dyno
18 psi on stock motor? What happened you left me hanging.
P
What Happen Cliff???? ?Really happen??
Time will tell if the truth ever comes out!
Time will tell if the truth ever comes out!
I didn't know that this was a touchy subject i just didn't want to do the same thing because we have been running two sleds at 16 psi for the past 2 months with no problems and been thinking of moving up.
Was it a stock motor? Or did it have some work done?
Was it a stock motor? Or did it have some work done?
C
Ill make you a deal sunshine, ill tell you how much boost cliff was really running , and you tell all of us why your powderlites 1200 kit was smoking worst than a forest fire
P
PowderLites turbo smoking??
Not too sure what your talking about smoking??
But I heard a lot of poping form Northbay on a turbo doo!!:crazy:
Not too sure what your talking about smoking??
But I heard a lot of poping form Northbay on a turbo doo!!:crazy:
C
Your right about the popping, but it was another one of your air boxes coming apart, Ok stop it now, your professionialism is really stating to get the better of u:laugh:
P
Rev Limiter 1200 Skidoo
We now are able to rev past 9000 RPM with using Rapid Bike 3 EFI control box.
Hindle header guys are spinning at 8750 for max power.
www.powderlites.com
We now are able to rev past 9000 RPM with using Rapid Bike 3 EFI control box.
Hindle header guys are spinning at 8750 for max power.
www.powderlites.com
