C
Not sure what model it is, but a friend of mine just bought it and I was curious what length paddles would fit on it. The paddle height is like 3/4 right now and she has a 1 1/2 or 2" to put on it. Will it fit?
1997 500
- Thread starter cristfrcarr
- Start date
5
I believe that the RMK version of this sled had a 1.25" track on it, and you could go that route without much modification. To go with a larger lugs you probally will have to either drop and roll the chaincase or install smaller diameter drivers in order to provide adaquate clearance in the tunnel.
C
Alright, That helps a bunch. Thanks.
1 1/2
if it is a 97 the 1 1/2 will fit for sure and the 1 3/4 should also fit...look at the fisch parts online the rmk-deep snow models should show tracks..that work on the chassis
if it is a 97 the 1 1/2 will fit for sure and the 1 3/4 should also fit...look at the fisch parts online the rmk-deep snow models should show tracks..that work on the chassis
Take a look at the serial number plate on the tunnel. There should be a 7-digit model number starting with "097...". The Polaris online parts catalog seperates the models by this number. For example, my '97 XLT RMK model # is 0970956. This should tell you for sure what model it is to know which tracks are shown for a paticular model.
