BOG & ERROR CODE 173

B

BC_mtn_rider

Well-known member

Nov 11, 2012

160

66

28

48

Surrey B.C.

• Jan 21, 2015

• #1

13 pro 1800miles on it. Check engine light came on & off all day. Error code 173 (high voltage exhaust sensor). Sled also bogged 4-5 times throughout the day only when I would pin it, but would then quickly re-gain power. Do I have to change the sensor or can it be cleaned?
I did turn my oiler up 2 turns, changed my fuel filter, spark plugs since last season. Could it be using too much oil? Sled is stock with an HPS can.

 

Boston Racing

Well-known member

Lifetime Membership

Nov 26, 2007

3,490

1,628

113

Colorado Springs, CO

• Jan 21, 2015

• #2

You need to replace the EGT sensor. They run like crap when they go out.

 

B

BC_mtn_rider

Well-known member

Nov 11, 2012

160

66

28

48

Surrey B.C.

• Jan 21, 2015

• #3

Ok, ya that's what I figured!...thanks Boston!

 

AKFULLTHROTTLE

Well-known member

Lifetime Membership

Dec 20, 2009

1,986

1,145

113

Alaska

• Jan 21, 2015

• #4

What he said... I have been through a few of them over the years.

 

S

sledless bdh

Member

Nov 4, 2008

231

23

18

Hermiston, Oregon

• Jan 23, 2015

• #5

Is the sensor covered under warranty?

 

A

ak

Well-known member

Dec 7, 2007

2,776

723

113

• Jan 23, 2015

• #6

It was when mine went out

 

B

BC_mtn_rider

Well-known member

Nov 11, 2012

160

66

28

48

Surrey B.C.

• Jan 24, 2015

• #7

no warranty on mine...$160cdn. dealer cost. my buddy works at the dealer, delivered it to my house, brought the mobile computer to clear the code & had a few beers!!!