new springs for slp 2

S

snowcannon

Member

Aug 20, 2015

111

11

18

Shuswap, BC

• Sep 21, 2017

• #1

I have a slp 2 kit on my 14 m8000 with about 1900 miles. Thinking it's time to replace the springs. A bunch of older threads mention h5 springs from speedwerx for the primary. I mainly ride 5-7k ft elevation. For that range a 120-320 primary was recommended along with stock 68g weights. I checked speedwerx's site but can't find that particular spring. What's the next closest spring I can/should use?
Also should I put a new spring in the secondary? Which one?
Lastly, what else should I do to the clutches maintenance-wise? I already plan to get go-rings from thunder.
All input is appreciated.

Sent from my SM-G950W using Tapatalk

 

R

Readymedic

Free Member

Nov 6, 2013

469

95

28

Saskatchewan Canada

• Sep 21, 2017

• #2

YOU MUST do the go-rings!!!!!

 

Cat00

Well-known member

Lifetime Membership

Nov 26, 2007

293

85

28

• Sep 21, 2017

• #3

The closest would be the 120-310 I'm going to try that one this year with my mds weights

Last year I ran a 170-270 seemed to help some if I was going to do it again i would prob try a 170-250 or a 150-250

 

Last edited: Sep 21, 2017

F

Frostbite

Well-known member

Lifetime Membership

Dec 15, 2007

4,738

721

113

Eastern Washington

• Sep 21, 2017

• #4

Yup, I thought the 120-340 would be the ticket but, the 120-310 H5 Speedwerx springs seems to work the best with my MDS weights. I also have an improved secondary spring that works quite a bit better but, I would have to do a search to see what it is.

There you go. I found the secondary spring thread and brought it back up to the top for you.

 

Last edited: Sep 21, 2017

S

snowcannon

Member

Aug 20, 2015

111

11

18

Shuswap, BC

• Sep 22, 2017

• #5

Thanks for the responses guys. So based on those and the old thread mentioned by Frostbite, I will get a h5 120-310 for the primary and a h5 170-250 for the secondary.

Sent from my SM-G950W using Tapatalk

 

S

snowcannon

Member

Aug 20, 2015

111

11

18

Shuswap, BC

• Sep 22, 2017

• #6

Frostbite said:

Yup, I thought the 120-340 would be the ticket but, the 120-310 H5 Speedwerx springs seems to work the best with my MDS weights. I also have an improved secondary spring that works quite a bit better but, I would have to do a search to see what it is.

There you go. I found the secondary spring thread and brought it back up to the top for you.

Click to expand...

Frostbite, what rpm engagement do you get with your setup?

Sent from my SM-G950W using Tapatalk