Y
pic
kinda a misleading pic than, and that would also explain why your flanges are so thick.
kinda a misleading pic than, and that would also explain why your flanges are so thick.
Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
I don't know if maybe I'm missing something but the first picture looking at the direction of the exhaust inlet and the body of the can behind it, it appears as though the restriction in the exhaust is on the bottom side of the exhaust not the top side where you added pipe to enlarge it.
Also, not trying to nay-say, just asking the question; how does the spinning effect of the exhaust gasses coming out of the turbo work going in to a non round exhaust pipe. I don't see a restriction there being a good thing but wouldn't think extra turbulence there would be good either. If designed right you can get as much or more flow through a small diameter than a large one that doesn't have very good laminar glow characteristics.
So I was pretty concerned about this on my kit based on the initial photos, so I too tore my down pipe off my silber kit, and I will say the pictures earlier are some what misleading. Like Boyko and Boston Racing stated there is like a 1" space on the turbo housing where the turbine is and where the wastegate dump into and then go out the 2.5" down pipe. So it not like its right in front of the turbo or wg. While it may not be the best flow possible like a divorced wastegate or a tial housing, it still will work fine IMO. Here are the pics:
Silber dp with the muffpot mounted
down pipe removed from the turbo, notice the 1" pocket in the housing:
Pocketed flange
So, unless you get the waste gate and turbine outlet separated with like a shelf into the housing, I don't really see much gain with adding the additional piping. Sorry for my previous post, I was misinterpreting the pictures.
I love American Idol
Snowest should close the turbo forums for so many ignorant comments.
Thanks for the laughs.. Silber.
Team Kimco !!! ???? exactly
Kimco = low quality knock off honda's.
Rydening, you should know better,, these kits are like RONCO products. late night infomercials
LOL and 90% buy RONCO product for its lowprice, but they get what they pay for.... Anyway, long time since I have heard from you over there, have good one Thanks for the good laught...I still laught here...hehheehThanks for the laughs.. Silber.
Team Kimco !!! ???? exactly
Kimco = low quality knock off honda's.
Rydning, you should know better,, these kits are like RONCO products. late night infomercials
Thanks for stopping by Gus:face-icon-small-dis